
Warm isostatic press DL-DJY-M250-60
- product description
The main technical parameters
1. Working pressure: 60MPa
2. Operating temperature: room temperature ~ 80¡æ
3. High-pressure medium: deionized water
4. Warm-up time: 0-3000S can be set freely
5. Pressure holding time: adjustable in three stages 0¡«30min
7. Pressing speed: 0---60MPa/300 seconds
6. Pressure relief speed: 3 seconds (speed adjustable)
7. Heating time: 120min at room temperature---80¡æ (can be designed according to user requirements)
9. Effective volume: 12L 200*150*400 (mm)
10. Total power: 10KW
11. Equipment size: 1700*900*2200 (mm* mm* mm)
12. Production cycle: 5-15min/time (according to product pressure holding time)
13. Pressure fluctuation range: ¡À0.2Mpa
14. The electrical control system is Siemens PLC programmable control
14. 10-inch color LCD touch screen (touch screen)
15. Working pressure and holding time can be adjusted according to requirements
16. The ultra-quiet 2KW servo motor closed-loop hydraulic control system controls the rise and fall of the cavity (low noise; energy saving; stable; safe)
16. After the charging is started, it can automatically complete the full set of preheating, preloading, boosting, holding and unloading.
The main technical parameters
1. Working pressure: 60MPa
2. Operating temperature: room temperature ~ 80¡æ
3. High-pressure medium: deionized water
4. Warm-up time: 0-3000S can be set freely
5. Pressure holding time: adjustable in three stages 0¡«30min
7. Pressing speed: 0---60MPa/300 seconds
6. Pressure relief speed: 3 seconds (speed adjustable)
7. Heating time: 120min at room temperature---80¡æ (can be designed according to user requirements)
9. Effective volume: 12L 200*150*400 (mm)
10. Total power: 10KW
11. Equipment size: 1700*900*2200 (mm* mm* mm)
12. Production cycle: 5-15min/time (according to product pressure holding time)
13. Pressure fluctuation range: ¡À0.2Mpa
14. The electrical control system is Siemens PLC programmable control
14. 10-inch color LCD touch screen (touch screen)
15. Working pressure and holding time can be adjusted according to requirements
16. The ultra-quiet 2KW servo motor closed-loop hydraulic control system controls the rise and fall of the cavity (low noise; energy saving; stable; safe)
16. After the charging is started, it can automatically complete the full set of preheating, preloading, boosting, holding and unloading.